Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).




2. Remove the MAF/IAT sensor TORX(R) screws.
3. Remove the MAF/IAT sensor.

INSTALLATION PROCEDURE




1. Install the MAF/IAT sensor.

NOTE: Refer to Fastener Notice.

2. Install the MAF/IAT sensor TORX(R) screws.

Tighten the screws to 8 N.m (70 lb in).




3. Connect the MAF/IAT sensor electrical connector (1).