Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2006 >> Yukon 2WD V8-5.3L VIN T >> Repair and Diagnosis >> Heating and Air Conditioning >> Control Module HVAC >> Service and Repair >> HVAC Systems - Automatic >> Blower Motor Processor Replacement - Auxiliary
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Processor Replacement - Auxiliary



BLOWER MOTOR PROCESSOR REPLACEMENT - AUXILIARY

REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Disconnect the electrical connector from the auxiliary blower motor processor (1).
3. Remove the retaining screws from the auxiliary blower motor processor (1).




4. Remove the auxiliary blower motor processor (1) from the auxiliary HVAC module (2).

INSTALLATION PROCEDURE




1. Install the auxiliary blower motor processor (1) to the auxiliary HVAC module (2).
2. Install the retaining screws to the auxiliary blower motor processor (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.6 N.m (14 lb in).

3. Connect the electrical connector to the auxiliary blower motor processor (1).
4. Install the right rear quarter trim panel.
pro multis · About Operation CHARM