Horn Switch Replacement

Horn Switch Replacement
Removal Procedure





1. Caution: Refer to Servicing the SIR System Caution in Service Precautions.

Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.
2. Remove the inflatable restraint steering wheel module.
3. Remove the horn plunger from the steering column by pressing inward to the stop and rotating the horn plunger 90°.





4. Disconnect the captured screws (1,4) to the horn contact plate (2) from the steering wheel (3).
5. Remove the horn switch (2) from the steering wheel (3).

Installation Procedure





1. Install the horn switch (2) to the steering wheel (3).

2. Notice: Refer to Fastener Notice in Service Precautions.

Connect the captured screws (1,4) from the horn contact plate (2) to the steering wheel (3) .
^ Tighten the screws to 5.5 Nm (50 inch lbs.).





3. Install the horn plunger to the steering column.
4. Install the inflator module.
5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3.