Scan Tool Data Definitions - Rear Drive Axle
Scan Tool Data Definitions
The rear differential clutch control module (CCM) scan tool data definitions contain a brief description of all CCM related parameters available on the scan tool. The parameters available on the scan tool are listed below in alphanumeric order.
Accelerator Pedal Position Sensor
The scan tool displays a percent of pedal opening position. The scan tool displays a range from 0 to 100 %.
Battery Voltage
The scan tool displays volts. The scan tool displays a range from 0 to 25.5 volts.
Est. RDS clutch Spd. Variation
The scan tool displays 1/min. The scan tool indicates a range from -640 to 635 RPMs.
Estimate clutch Temperature
The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C.
LF Wheel Speed Sensor
The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
LR Wheel Speed Sensor
The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
Rear Drive Solenoid Cmd.
The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C.
Rear Drive System Temperature Sensor
The scan tool displays °C. The scan tool indicates a range from -40 to 215 °C.
Rear Drive Torque Command
The scan tool displays N-m. The scan tool displays a range from 0 to 2550 N-m.
RF Wheel Speed Sensor
The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
RR Wheel Speed Sensor
The scan tool displays 0-160 km/h (0-99.5 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving or is moving at speeds less than or equal to 0 km/h (0 mph).
Vehicle Speed
The scan tool displays 0-1024 km/h (0-636 mph). The scan tool displays 0 km/h (0 mph) when the vehicle is not moving.