Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2007 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Maintenance >> Filters >> Air Cleaner Housing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair



Air Cleaner Assembly Replacement

Removal Procedure




1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.




2. Loosen the clamp and disconnect the air cleaner outlet duct from the air cleaner assembly.
3. Remove the 2 bolts (3) and nut (5) securing the air cleaner assembly to the wheel house (4).
4. Remove the air cleaner assembly from the vehicle.

Installation Procedure




1. Position the air cleaner assembly into the engine compartment, inserting the snorkel (2) into the fender (1).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 2 bolts (3) and nut (5) securing the air cleaner assembly to the wheel house (4).

* Tighten the air cleaner assembly bolts to 15 N.m (11 lb ft).
* Tighten the air cleaner assembly nut to 15 N.m (11 lb ft).

3. Connect the air cleaner outlet duct to the air cleaner assembly.

Tighten the air cleaner outlet duct clamp to 6 N.m (53 lb in).




4. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.

pro multis · About Operation CHARM