Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2007 >> Canyon 4WD L4-2.9L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sensor: Service and Repair



Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the engine wiring harness electrical connector (2) from the oil pressure switch (1).




3. Remove the engine oil pressure switch.

Installation Procedure





Notice: Refer to Component Fastener Tightening Notice.

1. Install the engine oil pressure switch.

Tighten the switch to 20 N.m (15 lb ft).




2. Connect the engine wiring harness electrical connector (2) to the oil pressure switch (1).
3. Lower the vehicle.

pro multis · About Operation CHARM