Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Speed Sensor: Service and Repair

Transfer Case Speed Sensor Replacement

Removal Procedure

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the speed sensor electrical connector (4).

3. Remove the speed sensor.

Installation Procedure

Notice: Refer to Fastener Notice.

1. Install the speed sensor.

Tighten the sensor to 15 N.m (11 lb ft).

2. Connect the speed sensor electrical connector (4).
3. Lower the vehicle.