Auxiliary Battery Positive Cable Replacement - Battery to Battery Relay
Auxiliary Battery Positive Cable Replacement - Battery to Battery Relay (6.2L)
Removal Procedure
1. Disconnect the auxiliary battery.
2. Remove the underhood junction block cover.
3. Open the auxiliary battery positive cable post cover.
4. Loosen the auxiliary battery positive cable nut (2).
5. Remove the auxiliary battery positive cable from the battery positive post.
6. Remove the auxiliary battery positive cable nut (1) from the underhood junction block stud.
7. Remove the auxiliary battery positive cable terminal from the underhood junction block stud.
8. Reposition the auxiliary battery positive cable boot (5) at the auxiliary battery relay.
9. Remove the auxiliary battery positive cable nut (6) from the rely stud.
10. Remove the auxiliary battery positive cable terminal from the relay stud.
11. Remove the auxiliary battery positive cable clips (4) from the engine wiring harness and remove the cable from the vehicle.
Installation Procedure
1. Install the auxiliary battery positive cable to the vehicle.
2. Install the auxiliary battery positive cable terminal to the relay stud.
Notice: Refer to Fastener Notice.
3. Install the auxiliary battery positive cable nut (6) to the rely stud.
Tighten the nut to 7.5 N.m (66 lb in).
4. Position the auxiliary battery positive cable boot (5) at the auxiliary battery relay.
5. Install the auxiliary battery positive cable to the battery positive post.
6. Tighten the auxiliary battery positive cable nut (2).
Tighten the nut to 7.5 N.m (66 lb in).
7. Install the auxiliary battery positive cable terminal to the underhood junction block stud.
8. Install the auxiliary battery positive cable nut (1) to the underhood junction block stud.
Tighten the nut to 5 N.m (44 lb in).
9. Install the auxiliary battery positive cable clips (4) to the engine wiring harness.
10. Close the auxiliary battery positive cable post cover.
11. Install the underhood junction block cover.
12. Connect the auxiliary battery.