Operation CHARM: Car repair manuals for everyone.

Center Console End Panel Replacement



Center Console End Panel Replacement

Removal Procedure

1. Remove the storage bin. Refer to Console Storage Bin Replacement (Pro) Console Storage Bin Replacement (Expect Pro) .
2. Remove the rear cupholder from the end panel. Refer to Front Floor Console Rear Cup Holder Replacement .




3. Remove the 2 retaining screws.




4. Remove the top 2 retaining screws.
5. Move the end panel rearwards to gain access to the electrical connectors.
6. Remove the end panel from the console.
7. Remove the rear seat audio controls, if equipped. Refer to Rear Seat Audio Control Replacement .
8. Remove the power outlets from the end panel, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .



Installation Procedure

1. Install the power outlets to the end panel, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .
2. Install the rear seat audio control, if equipped. Refer to Rear Seat Audio Control Replacement .
3. Connect all electrical connectors.
4. Install the end panel to the console.





Notice: Refer to Fastener Notice .

5. Install the 2 top retaining screws.

Tighten the screws to 1.6 N.m (14 lb in).





6. Install the 2 retaining screws.

Tighten the screws to 1.6 N.m (14 lb in).

7. Install the rear cupholder to the end panel. Refer to Front Floor Console Rear Cup Holder Replacement .
8. Install the storage bin. Refer to Console Storage Bin Replacement (Pro) Console Storage Bin Replacement (Expect Pro) .