Front Seat Adjuster Replacement (Manual)

Front Seat Adjuster Replacement (Manual)

Removal Procedure

1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
3. Remove the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .
4. Remove the seat back frame. Refer to Front Seat Back Frame Replacement .
5. Remove the seat back hinge/recliner mechanism. Refer to Front Seat Back Hinge and Recliner Mechanism Replacement .
6. Remove the seat adjuster track cover. Refer to Front Seat Adjuster Track Finish Cover Replacement .




7. Remove the inboard seat belt buckle and nut (1).
Disconnect the electrical connection (2).




8. Remove the bar (1) from the adjuster tracks (2). Straighten the tabs in order to remove the bar.
9. Remove the cross brace (3).
10. Remove the EZ entry rod (4), if equipped with the EZ entry feature.
11. Remove the cushion tilt mechanism, if equipped.



Installation Procedure

1. Install the cushion tilt mechanism, if equipped.




2. Install the EZ entry rod (4), if equipped with the EZ entry feature.
3. Install the cross brace (3).
4. Install the bar (1) onto the racks (2). Bend the tabs in order to secure the bar.





Notice: Refer to Fastener Notice .

5. Install the inboard seat belt buckle and nut (1).

Tighten the nut to 53 N.m (39 lb ft).

6. Connect the electrical connection (2).
7. Install the seat adjuster track cover. Refer to Front Seat Adjuster Track Finish Cover Replacement .
8. Install the seat back hinge/recliner mechanism. Refer to Front Seat Back Hinge and Recliner Mechanism Replacement .
9. Install the seat back frame. Refer to Front Seat Back Frame Replacement .
10. Install the seat cushion frame. Refer to Front Seat Cushion Frame Replacement .
11. Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
12. Install the front seat in the vehicle. Refer to Front Seat Replacement - Bucket .