Front Seat Adjuster Replacement (Power)

Front Seat Adjuster Replacement (Power)

Removal Procedure

1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the seat trim panel. Refer to Front Seat Trim Panel Replacement .
3. Remove the seat cushion frame from the seat adjuster. Refer to Front Seat Cushion Frame Replacement .




4. Remove the inboard seat belt buckle and nut (1).
5. Disconnect the electrical connection (2).
6. Remove the seat back frame from the seat adjuster. Refer to Front Seat Back Frame Replacement .
7. Remove the seat back hinge/recliner mechanism. Refer to Front Seat Back Hinge and Recliner Mechanism Replacement .
8. Remove the seat adjuster track cover. Refer to Front Seat Adjuster Track Finish Cover Replacement .
9. Remove the memory module, if equipped. Refer to Memory Seat Control Module Replacement .



Installation Procedure

1. Install the memory module, if equipped. Refer to Memory Seat Control Module Replacement .





Notice: Refer to Fastener Notice .

2. Install the inboard seat belt buckle and nut (1).

Tighten the nut to 53 N.m (39 lb ft).

3. Connect the electrical connection (2).
4. Install the seat adjuster track cover. Refer to Front Seat Adjuster Track Finish Cover Replacement .
5. Install the seat back hinge/recliner mechanism. Refer to Front Seat Back Hinge and Recliner Mechanism Replacement .
6. Install the seat back frame to the seat adjuster. Refer to Front Seat Back Frame Replacement .
7. Install the seat cushion frame to the seat adjuster. Refer to Front Seat Cushion Frame Replacement .
8. Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
9. Install the seat in the vehicle. Refer to Front Seat Replacement - Bucket .
10. If the vehicle is equipped with memory seats, calibrate the seat. Refer to Memory Seat Calibration .