Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER RESONATOR OUTLET DUCT REPLACEMENT

REMOVAL PROCEDURE




1. Loosen the clamp and separate the air cleaner outlet duct at the mass air flow (MAF)/intake air temperature (IAT) sensor.
2. Loosen the clamp and separate the air cleaner outlet duct from the throttle body.
3. Remove the radiator inlet hose clamp from the outlet duct.
4. Remove the air cleaner outlet duct.

INSTALLATION PROCEDURE




1. Install the air cleaner outlet duct.
2. Install the air cleaner outlet duct to the throttle body.
3. Install the air cleaner outlet duct to MAF/IAT sensor.
4. Install the radiator inlet hose clamp to the outlet duct.

NOTE: Refer to Fastener Notice.

5. Tighten the air cleaner outlet duct clamps.

Tighten the clamps to 4 N.m (35 lb in).