Operation CHARM: Car repair manuals for everyone.

113. Input Speed Sensor Installation



Input Speed Sensor Installation

Tools Required

^ J 36850 Transjel(r) Lubricant





1. Install the vehicle speed sensor O-ring (3) onto the input speed sensor (ISS) (2). Apply J 36850 or an equivalent lubricant to the O-ring (3).
2. Install the ISS (2) into the converter housing.

3. Notice:
Refer to Fastener Notice in Service Precautions.

Install the vehicle speed sensor bolt (1) into the converter housing.

Tighten the bolt to 12 Nm (108 inch lbs.).