50. Fiber 4-5-6 Clutch Plate Inspection

Fiber 4-5-6 Clutch Plate Inspection





1. Important:
^ Measure as described below at a minimum of 3 locations.
^ Replace any 4-5-6 clutch fiber plate that does not meet specifications.

Measure the thickness of each 4-5-6 clutch fiber plate (1) at dimension A.
The 4-5-6 clutch fiber plate minimum thickness is 2.375 mm (0.0935 inch).
2. Measure the 4-5-6 clutch fiber plate oil groove depth of each plate at dimension B.

The 4-5-6 clutch fiber plate minimum groove depth is 0.200 mm (0.0079 inch).