Air Temperature Door Replacement - Left Side

AIR TEMPERATURE DOOR REPLACEMENT - LEFT SIDE

REMOVAL PROCEDURE




1. Remove the HVAC module.
2. If equipped remove the heat stakes (1) from the HVAC module (2) with a screw driver and a hammer.




3. If equipped remove the HVAC module assembly screws.
4. Remove the upper HVAC module case (3) from the lower HVAC module case (10).
5. Remove the air temperature separator plate (5) from the lower HVAC module case (10).
6. Remove the left temperature door (11) from the lower HVAC module case (10).

INSTALLATION PROCEDURE




1. Install the left temperature door (11) to the lower HVAC module case (10).
2. Install the air temperature separator plate (5) to the lower HVAC module case (10).
3. Install the upper HVAC module case (3) to the lower HVAC module case (10).

4. NOTE: Refer to Fastener Notice.

IMPORTANT: For every heat stake removed ensure that you install a screw.

Install the screws to the HVAC module assembly.

Tighten the screws to 1.6 N.m (14 lb in).

5. Install the HVAC module.