Refrigerant Pressure Sensor / Switch: Service and Repair

AIR CONDITIONING (A/C) REFRIGERANT PRESSURE SENSOR REPLACEMENT

TOOLS REQUIRED
J 39400-A Halogen Leak Detector

REMOVAL PROCEDURE




1. Disconnect the electrical connector from the A/C high pressure recirculation switch.
2. Remove the A/C high pressure recirculation switch (1) from the condenser tube.

INSTALLATION PROCEDURE

1. NOTE: Refer to Fastener Notice.




Install the A/C high pressure recirculation switch.

Tighten the switch to 6 N.m (53 lb in).

2. Connect the electrical connector to the A/C high pressure recirculation switch.
3. Leak test the fittings of the components using the J 39400-A.

4. Lower the vehicle.