Auxiliary Heating, Ventilation, and Air Conditioning Control Module Programming and Setup

AUXILIARY HEATING, VENTILATION, AND AIR CONDITIONING CONTROL MODULE PROGRAMMING AND SETUP

Each of the following service procedures may require programming or setup procedures to be performed on the auxiliary HVAC control module or HVAC actuators.

Auxiliary HVAC Control Module Replacement
If the auxiliary HVAC control module is replaced no additional procedures are necessary.

Auxiliary HVAC Control Module Reprogramming
Do not reprogram the auxiliary HVAC control module, unless directed by a service procedure, or a service bulletin.

Actuator Replacement
If an actuator is replaced, the following procedure must be performed:
- Re-Calibrating Actuators-Refer to Actuators Recalibration in HVAC Systems - Automatic. Programming and Relearning
- Re-Calibrating Actuators-Refer to Actuators Recalibration in HVAC Systems - Manual. Programming and Relearning