Rear Axle Lubricant Replacement (9.5 Inch HD Axle)

Rear Axle Lubricant Replacement (9.5 Inch HD Axle)

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.




2. Remove the rear axle fill plug.




3. Remove the rear axle drain plug.
4. Drain the lubricant into a suitable container.

Installation Procedure

Notice: Refer to Fastener Notice.




1. Install the rear axle drain plug.

Tighten the rear axle drain plug to 33 Nm (24 lb ft).

2. Fill the rear axle housing.
^ Use the proper fluid. Refer to Approximate Fluid Capacities.
^ For the correct capacity, refer to Fluid and Lubricant Recommendations.




3. Install the rear axle fill plug.

Tighten the rear axle fill plug to 33 Nm (24 lb ft).

4. Lower the vehicle.