Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

A/T Controls - Flat Spot At 35-50 MPH

TECHNICAL

Bulletin No.: 08-07-30-022A

Date: August 01, 2008

Subject:
Hesitation or Flat Spot Between 56-80 km/h (35-50 mph) (Reprogram Transmission Control Module)

Models:
2008 Buick Enclave
2007-2008 GMC Acadia
2007-2008 Saturn OUTLOOK

with FWD or AWD

Supercede:

This bulletin is being revised to correct the formatting of the table for the paper version of this bulletin. The electronic version in SI was correctly formatted. Please discard Corporate Bulletin Number 08-07-30-022 (Section 07 - Transmission/Transaxle).

Condition

Some customers may comment on a flat spot or hesitation between 56-80 km/h (35-50 mph) speed range.

Cause

The existing transmission calibration is programmed to maximize fuel economy and requires a greater throttle input than some customers would prefer to provide acceleration in this speed range.

Correction

A new calibration is available. This new calibration increases the speed required to obtain upshifts and removes TCC apply from 2nd to 3rd gear, thereby reducing engine lugging and improving vehicle response to accelerator input.

Important:
This calibration will have a negative impact on fuel economy of 0-1.2 L/100 km (0-2 mpg) combined driving.

To obtain this calibration, contact Techline (TCSC). Techline will reconfigure the vehicle to make this calibration the default calibration for this vehicle.





The table above shows the Shift Pattern Change at Light Throttle.

Warranty Information





For vehicles repaired under warranty, use the table above.





Disclaimer