Acceleration/Deceleration Sensor: Service and Repair

Longitudinal Accelerometer Replacement

Removal Procedure

1. Remove the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket) or Split Bench Seat Replacement (Split Bench Seat Replacement) .
2. Access the sensor through service slit provided in the carpet.




3. Remove the electrical connector from the sensor.




4. Remove the 2 nuts retaining the sensor to the floor panel.
5. Remove the sensor from the vehicle.

Installation Procedure




1. Install the sensor to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the 2 retaining nuts.

Tighten the screws to 9 N.m (80 lb in).




3. Install the electrical connector to the sensor.
4. Install the left split bench or bucket seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket) or Split Bench Seat Replacement (Split Bench Seat Replacement) .