Sunroof Track Timing/Synchronization (Extended Cab)

Sunroof Track Timing/Synchronization (Extended Cab)

Removal Procedure

1. Place the module in the full open position.
2. It is only necessary to lower the headliner. Only do those step in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (Regular Cab) Headlining Trim Panel Replacement (Crew Cab) Headlining Trim Panel Replacement (Extended Cab).
3. Disconnect the electrical connector from the motor/actuator.
4. Remove the motor/actuator.
5. Push the window guides rearward on the track until the guides are positioned against the rear hard stop.

Installation Procedure

1. Install the motor/actuator.
2. Connect the electrical connector to the motor/actuator.
3. Install the headliner.
4. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab New Motor) Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab Existing Motor) Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab Existing Motor) Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab New Motor).
5. Verify the operation of the sunroof.