Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Removal Procedure
1. Remove the engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side (Engine Mount Strut Bracket Replacement - Right Side).
2. Disconnect the engine wiring harness electrical connector (3) from the bank 2 exhaust camshaft position (CMP) sensor (4).
3. Remove the CMP sensor bolt and sensor (4).
Installation Procedure
Caution: Refer to Fastener Caution (Fastener Caution).
1. Install the CMP sensor (4) and bolt.
Tighten the bolt to 10 Nm (89 lb in).
2. Connect the engine wiring harness electrical connector (3) to the bank 2 exhaust CMP sensor (4).
3. Install the engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side (Engine Mount Strut Bracket Replacement - Right Side).