Rear Toe Adjustment

Rear Toe Adjustment





1. Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.

Note:
If experiencing problems in adjusting the rear toe, replace the existing nut with the service cam nut to eliminate the adjustment problem.

2. Rotate the suspension adjustment nut in the direction necessary to correct the toe angle.

3. Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.

4. Reinspect the rear toe specifications and adjust as necessary.

Caution:
Refer to Fastener Caution Fastener Caution.

5. Hold the nut and tighten the link-to-frame fastener bolt to 164 Nm (121 lb ft).

6. Repeat the procedure for the other rear wheel.