Timing Cover

Note: Engine front cover bolts in the number (25) location are model dependent and may not apply.

Tighten the engine front cover bolts (1-23) in the sequence shown to 20 Nm (15 lb ft).

Tighten the engine front cover bolts (1-23) a second pass in sequence to 20 Nm (15 lb ft).

Tighten the engine front cover bolts (1-23) a third pass in sequence an additional 60 degrees.

Tighten the engine front cover bolts (24) to 15 Nm (11 lb ft).

Tighten the engine front cover bolts (25) to 65 Nm (48 lb ft).