Auxiliary Battery Positive Cable Replacement

Auxiliary Battery Positive Cable Replacement (Diesel)

Removal Procedure





1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2) Battery Negative Cable Disconnection and Connection (TP2)Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Single Battery).

2. If equipped with dual generators,remove the mega fuse nut (1) on top of the auxiliary battery.





3. Disconnect the generator battery jumper cable. Refer to Generator Battery Jumper Cable Replacement (K76) Generator Battery Jumper Cable Replacement (K76)Generator Battery Jumper Cable Replacement (Diesel) Generator Battery Jumper Cable Replacement

4. Loosen the auxiliary battery positive clamp nut (1) and remove the clamp from the battery post.

5. Remove the cable retainers (2) along the top of the fan shroud.





6. Remove the auxilliary battery positive harness clips (1) from the condensor hose and the transmission cooler hose.





7. Remove the mega fuse block nut (1) and the auxillary battery positive cable terminal (2), from the mega fuse block.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Install the auxilliary battery positive clamp to the battery post and tighten clamp nut (1) to 9 Nm (80 lb in)





2. If equipped with dual generators (K74),connect the generator jumper cable (3) to the mega fuse holder with the nut (1) and tighten to 9 Nm (80 lb in)

3. Install the auxilliary battery positive cable retainers (2) along the cooling fan shroud.





4. Install the auxiliary battery positive cable clips (1) to the condensor hose and the transmission cooler hose.





5. Install the auxiliary battery positive cable terminal (2) to the mega fuse block and tighten the nut (1) to 9 Nm (80 lb in)

6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (TP2) Battery Negative Cable Disconnection and Connection (TP2)Battery Negative Cable Disconnection and Connection (Single Battery) Battery Negative Cable Disconnection and Connection (Single Battery).