Kickdown Solenoid

Figure 4

Remove or Disconnect

1. Kickdown solenoid electrical connector (under RH side of battery tray).

^ Raise and suitably support vehicle. Refer to Section 0A in the 1990 or 1991 GEO Storm Service Manual.

2. Kickdown solenoid from transaxle by rotating counterclockwise.

3. Kickdown solenoid O-ring.


Install or Connect

1. New kickdown solenoid O-ring.

2. Kickdown solenoid to transaxle by rotating clockwise.

^ Lower vehicle.

3. Kickdown solenoid electrical connector (under RH side of battery tray).