Rear Wheel Alignment

Fig. 1 Suspension Geometry:

Wheel alignment is the angular relationship between the wheels, suspension attaching parts and ground. The angle of the knuckle away from the vertical, pointing in or out of wheels, tilt of the wheels from vertical (when viewed from front of vehicle) and tilt of suspension members from vertical (when viewed from side of vehicle), all of these are involved in proper alignment, Fig. 1.


CAMBER

Camber is the tilting of front and rear wheels from the vertical when viewed from front of vehicle. When wheels tilt outward at top, camber is positive (+). When wheels tilt inward, camber is negative (MI). Amount of tilt is measured in degrees from the vertical and this is camber angle.

TOE

Toe is the turning in or out of wheels. The purpose of toe is to ensure parallel rolling of wheels. Excessive toe-in or toe-out may increase tire wear. Toe also serves to offset small deflections of the suspension which occurs when vehicle is moving.