Starter Motor: Service and Repair

Fig. 4 Starter Motor Installation:

EXCEPT GSI MODELS
1. Disconnect battery ground cable.
2. Disconnect electrical connectors from starter motor, Fig. 4.
3. Remove starter motor attaching bolts.
4. Remove starter motor.
5. Reverse procedure to install.

GSI MODELS
1. Disconnect battery ground cable.
2. Remove rear cooling fan.
3. Raise and support vehicle.
4. Remove right and left splash shields.
5. Disconnect oxygen sensor connector.
6. Disconnect forward exhaust pipe.
7. Disconnect electrical connections from starter assembly.
8. Remove starter assembly attaching bolts.
9. Remove starter assembly from vehicle.
10. Reverse procedure to install.