Rear Wiper Motor

Fig. 11 Rear Windshield Wiper/Washer Motor & Linkage Assembly:

1. Disconnect battery ground cable.
2. Remove left and right hand speaker grilles from rear lid, if equipped.
3. Disconnect electrical connector from rear speakers, then remove speakers, if equipped.
4. Remove nine push pins from lid access panel, then remove panel.
5. Disconnect wiper motor electrical connector.
6. Remove wiper motor ground screw, then remove wiper linkage arm to wiper motor attaching nut, Fig. 11.
7. Remove three wiper motor attaching screws, then remove wiper motor.
8. Reverse procedure to install.