Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Throttle Position Sensor: Service and Repair

REMOVAL:

1. Disconnect electrical connectors.
2. Remove the TPS attaching screw assemblies and retainer, (if applicable).
3. Remove TPS from throttle body assembly.
NOTE: The TPS is an electrical component and must not be soaked in any liquid cleaner or solvent, as damage may result.

INSTALLATION:

1. Install TPS to throttle body assembly, while lining up TPS lever with TPS drive lever on throttle body.
2. Install the two attaching screw assemblies. Tighten screw assemblies to 2.0 N-m (18.0 lb. in.).
3. Install electrical connector to TPS.
4. Adjust the TPS as per specification. Refer to Powertrain Management/Computers and Control Systems/Throttle Position Sensor/Adjustments.