Operation CHARM: Car repair manuals for everyone.
Home >> Geo >> 1995 >> Tracker 4x2 L4-1.6L VIN 6 >> Repair and Diagnosis >> Restraints and Safety Systems >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair

Prior to performing replacement procedures, disarm air bag system. Refer to, Service and Repair/ Air Bag System Disarming & Air Bag System Arming. Refer to, / Specifications/ Mechanical for torque values when installing components.
All sensors and mounting bracket bolts must be carefully torqued to assure proper operation. Never power up the air bag system when any sensor is not rigidly attached to the vehicle, since the sensor could be activated when not attached, causing air bag deployment.


1. Disconnect battery ground cable.
2. Remove rear and then front console to access SDM.
3. Disconnect connector assurance and electrical connector.
4. Remove attaching screws from SDM.
5. Remove SDM from vehicle.
6. Reverse procedure to install.
pro multis · About Operation CHARM