Operation CHARM: Car repair manuals for everyone.
Home >> Geo >> 1996 >> Tracker 4x2 L4-1.6L VIN 6 >> Repair and Diagnosis >> Powertrain Management >> Fuel Delivery and Air Induction >> Service and Repair >> Fuel System Pressure Relief Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel System Pressure Relief Procedure

Fuel Pump Relay:






FUEL PRESSURE RELIEF PROCEDURE

WARNING:
^ To reduce the risk of fire and personal injury, it is necessary to relieve fuel system pressure before servicing fuel system components.

^ After relieving fuel system pressure, a small amount of fuel may be released when servicing fuel lines or connections. In order to reduce the chance of personal injury, cover fuel line fittings with a shop towel before disconnecting to catch any fuel that may leak out. Place the towel in an approved container when disconnect is complete.

PROCEDURE:
1. Loosen fuel filler cap to relieve fuel tank pressure.
2. Disconnect fuel pump relay electrical connector.
3. Crank engine and allow to stall. Crank engine for an additional three seconds to assure relief of any remaining fuel pressure.
4. Remove negative (-) battery cable to avoid possible fuel discharge if an attempt is made to start the engine.
5. Reconnect fuel pump relay electrical connector.
6. Tighten fuel filler cap.


pro multis · About Operation CHARM