Accumulator: Service and Repair

REMOVAL

1. Remove transmission fluid filter. Refer to Transmission Filter. Service and Repair
2. Remove valve body. Refer to Valve Body. Service and Repair

Fig.11 Accumulator Compressed Air Apply Passage:

3. Cover accumulators with a clean cloth and apply regulated low compressed air slowly to fluid passage, Fig. 11, until air pressure forces second brake, direct clutch and forward clutch accumulators from transmission case bores.

INSTALLATION

1. Apply automatic transmission fluid to TV cable O-ring, then install O-ring on cable.
2. Install TV cable to transmission.

Fig.12 Accumulator Piston And Spring Replacement:

3. Apply automatic transmission fluid to O-rings, springs and install on accumulator pistons, Fig. 12.

Fig.13 Accumulator Piston Location:

4. Install accumulator pistons in transmission bores, Fig. 13.
5. Install valve body. Refer to Valve Body. Service and Repair
6. Install fluid filter. Refer to Transmission Filter. Service and Repair