Condenser: Service and Repair

Noise Suppressor Filter Location:

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Noise suppressor filter from bulkhead.
3. Electrical tape and noise suppressor filter from main harness.
4. Noise suppressor filter electrical connector.

INSTALL OR CONNECT
1. Noise suppressor filter electrical connector.
2. Noise suppressor filter to main harness; secure with electrical tape.
3. Noise suppressor filter to bulkhead.
4. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 ft lb).