Rear
REMOVE OR DISCONNECT1. Negative (-) battery cable.
2. Raise and suitably support vehicle.
3. Two bolts and wheel speed sensor cover.
Rear Wheel Speed Sensor And Cover:
Rear Wheel Speed Sensor:
4. Wheel speed sensor electrical connector.
5. Mounting bolt and rear wheel speed sensor from vehicle.
Inspecting Rear Wheel Speed Sensor:
6. Inspect O-ring for damage or deterioration. Replace as necessary.
7. Inspect wheel speed sensor for metal particles. Clean as necessary.
INSTALL OR CONNECT
1. Coat O-ring with a film of differential oil.
2. Wheel speed sensor to differential carrier with mounting bolt, then tighten to 23 Nm (17 ft. lbs.).
3. Wheel speed sensor electrical connector.
4. Wheel speed sensor cover, then tighten to 15 Nm (11 ft. lbs.).
5. Lower vehicle.
6. Negative (-) battery cable.