Air Cleaner Housing: Service and Repair

REMOVAL
1. Negative (-) battery cable.
2. Mass Air Flow (MAF) and Intake Air Temperature (IAT) sensor electrical connectors.
3. Loosen Air cleaner hose-to-MAF sensor hose clamp.
4. Air cleaner hose from MAF sensor.
5. Three bolts and air cleaner from vehicle.

NOTE: If the Air cleaner is being replaced as an assembly, the MAF sensor, IAT sensor Air cleaner element must be transferred to the new air cleaner assembly.

INSTALLATION
1. Air cleaner into vehicle; secure with three bolts.
^ Tighten the air cleaner mounting bolts to 10 Nm (89 inch lbs.).
2. Air cleaner hose to MAF sensor.
^ Tighten air cleaner hose-to-MAF sensor hose clamp.
3. MAF and IAT sensor electrical connectors.
4. Negative (-) battery cable.