Camshaft, Engine

TIGHTENING SPECIFICATIONS
Camshaft Carrier Cap Bolts 10 Nm (89 inch lbs.)

DIMENSIONS
Standard Camshaft Lobe Height:
Intake 36.151-36.331 mm (1.4241-1.4303 inch)
Exhaust 36.356-36.516 mm (1.4314-1.4376 inch)
Minimum Camshaft Lobe Height:
Intake 36.071 mm (1.4202 inch)
Exhaust 36.256 mm (1.4275 inch)
Camshaft Runout (Maximum) 0-.10 mm (0.0039 inch)
Camshaft Journal (Standard):
Outside Diameter 27.939-27.960 mm (1.1000-1.1008 inch)
Bore Inside Diameter 28.00-28.021 mm (1.1024-1.1031 inch)
Camshaft Journal-To-Journal Bore Clearance:
Standard 0.040-0.082 mm (0.0016-0.0032 inch)
Maximum 0.2 mm (0.0047 inch)