Driver's Switch Panel
Driver's Switch Panel Removal/ InstallationNOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.
1. Gently pull out on the driver's switch panel (A) to release the right clips (B), then detach the remaining clips (C). If equipped, disconnect the cruise control main switch connector (D), TCS switch connector (E), power mirror switch connector (F) and power sliding door switch connector (G), then remove the panel.
2. Install the panel in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly (if equipped).
- Push the clips into place securely.