Torque Converter Clutch Solenoid: Testing and Inspection

Torque Converter Clutch Solenoid Valve Test





1. Disconnect the connector from the torque converter clutch solenoid valve.
2. Measure torque converter clutch solenoid valve resistance at the solenoid valve connector (black).
STANDARD: 12 - 25 ohms
3. Replace torque converter clutch solenoid valve if the resistance is out of standard.
4. If the resistance is within the standard, connect the No. 2 terminal of the torque converter clutch solenoid valve connector to the battery positive terminal, and connect the No. 1 terminal to the battery negative terminal. A clicking sound should be heard. Replace torque converter clutch solenoid valve if no clicking sound is heard.