DTC 85-79
DTC 85-79: OPDS Sensor Drift Check Failure1. Erase the DTC memory.
2. Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the SRS indicator stay on, and is DTC 85-79 indicated?
YES - Turn the ignition switch OFF, and go to step 3.
NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. Diagnostic Strategies If another DTC is indicated, go to the DTC Troubleshooting Index. DTC List - Supplemental Restraint System
3. Make sure nothing is on the front passenger's seat.
4. Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the SRS indicator go off?
YES - The system is OK.
NO - Go to step 5.
5. Initialize the OPDS unit.
6. Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.
Does the SRS indicator go off?
YES - The system is OK.
NO - Replace the OPDS unit and retest. If the problem is still present, replace the OPDS sensor/seat-back.