Ignition Switch: Service and Repair

1. On models equipped with airbag, disarm airbag as described under Air Bags and Seat Belts / Air Bags (Supplemental Restraint Systems / Airbag System Disarming).
2. On all models, disconnect battery ground cable.
3. On Accord and Prelude models, remove steering wheel and steering column lower cover.
4. On Civic CRX, Civic and Civic Wagon, remove dashboard lower panel and steering column lower cover.
5. On Civic and Civic Wagon models, remove dashboard lower panel, left knee bolster and steering column lower cover.
6. On all models, disconnect ignition switch electrical connector from dash fuse box.
7. Insert key and place in the ``LOCK'' or ``O'' position.
8. Remove two switch set screws, then the switch.
9. Reverse procedure to install.
10. Rearm airbag, if equipped.