Blower Motor: Service and Repair

On some models, the evaporator must be removed before removing blower motor.
1. On 1992 Prelude models, disable coded theft protection system as described under MAINTENANCE PROCEDURES/CODED THEFT PROTECTION DISARMING.
2. On models equipped with airbag, disarm airbag as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
3. On all models, disconnect battery ground cable.
4. Remove glove compartment and passengers tray, if equipped.
5. Remove blower duct.
6. Remove wire connector from blower motor.
7. Remove vacuum hose from blower housing, if equipped.
8. Remove three blower motor housing attaching bolts, then the blower motor housing.
9. Remove blower motor from blower motor housing.
10. Reverse procedure to install.