Frequent Stalling During Engine Warm-Up

Check:

1. Electronic Air Control Valve (EACV) (14)
2. Fuel Supply
a. Injector Resistor
b. Fuel Injector
c. Contaminated Fuel
3. Coolant Temperature (TW) Sensor (6)
4. Electronic Control (ECU) Unit (BU)

NOTE:
After each symptom, the system that could be the source of the symptom are listed and should be checked in the order they are listed, beginning with #1.

(BU) code used when the CHECK ENGINE warning light is on. Jump the service check connector, if no code is displayed (CHECK ENGINE LIGHT stays on steady), the back-up system is in operation.

Self-diagnosis indicator, (CHECK ENGINE LIGHT) blinks (?), will follow associated systems.