Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair

1. Disconnect battery negative and positive terminals.
2. Remove steering wheel maintenance lid, then disconnect cable reel harness and airbag assembly connector. Connect short connector to airbag assembly.
3. Pull down carpeting from both sides of front console and remove harness protector.
4. Disconnect SRS control unit connector.
5. Remove four SRS control unit mounting bolts, then control unit from vehicle.
6. Reverse procedure to install noting the following:
a. Torque control unit mounting bolts to 7.2 Ft. Lbs.
b. Confirm proper system by turning ignition switch on and observing instrument panel SRS indicator light. It should come on for approximately six seconds, then turn off.