Replacement

Front Bumper Replacement

CAUTION: Wear gloves to remove and install the front bumper.

NOTE:
^ An assistant is helpful when removing the front bumper.
^ Take care not to scratch the front bumper.






1. Remove the front turn signal light, then disconnect the connectors on each side.











2. Remove the bolt and screw on each side.






3. Remove the bolts and clips.






4. Lift and remove the front bumper.

NOTE: If necessary, disassemble the front bumper.






5. Installation is the reverse of the removal procedure. Bumper

NOTE: Align the front bumper with the front fender and headlight properly, then tighten the bolts.