Windshield Washer Switch: Testing and Inspection

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Remove steering column covers.
3. Disconnect 8-P connector from wiper switch.
4. Remove two switch screws, then pull out switch.

Fig. 10 Wiper/Washer Switch Continuity Chart:

5. Check for continuity between terminals in each switch position according to the table in Fig. 10. Replace switch as necessary.
6. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.