Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 1994 >> Prelude L4-2.2L SOHC >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Exhaust Gas Recirculation >> EGR Valve Position Sensor >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

EGR Valve Position Sensor: Testing and Inspection

INSPECTION

1. Turn ignition switch off. Install test harness between Programmed Fuel Injection Electronic Control Module (PGM-FI ECM) and harness connector. Turn ignition switch on.

PGM-FI ECM Connector Description And Wire Location:





2. Measure voltage between terminal D12 (+) and terminal D22 (-).
^ With no vacuum applied to the Exhaust Gas Recirculation (EGR) Valve, voltage should read approx. 1.2 volts.
^ With 8 in. hg. of vacuum applied to the EGR Valve, voltage should read approx. 4.3 volts.
3. If voltage is not read or voltage reading does not change when vacuum is applied to the EGR Valve, replace the EGR Valve and Lift Sensor assembly.
pro multis · About Operation CHARM