SRS Unit Precautions

Take extra care when painting or doing body work in the area below the dashboard. Avoid direct exposure of the SRS unit or wiring to heat guns, welding, or spraying equipment.

Connect the short connectors before working below the dashboard near the SRS unit.

After any degree of frontal body damage or after a collision without airbag deployment, inspect the SRS unit for physical damage. If it is dented, cracked, or deformed, replace it.

Be sure the SRS unit is installed securely.





During installation or replacement, avoid strong impacts (impact wrench, hammer, etc.) in the area near the SRS unit.

Do not disassemble the SRS unit.

Store the SRS unit in a cool and dry place. Do not spill water or oil on the SRS unit, and keep it free from dust.