Manuals through 2025 now available!
Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.
LEMON is the spiritual successor to CHARM, I recommend you try it!
Link:
lemon-manuals.la or
lemon-manuals.org.ua
(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)
Or, hide this message:
temporarily or
permanently
Front
TESTING THE WHEEL SPEED SENSOR 1.
Check pulser for chipped or damaged teeth and replace as necessary.
Fig. 82 Measureing Front Speed Sensor Air Gap:
2.
Measure air gap between sensor and pulser all the way around while rotating driveshaft by hand,
Fig. 82. If gap exceeds its maximum specification at any point, the knuckle is most likely distorted and should be replaced. Air gap should be 0.020-0.040 inches.
