Shift Interlock Solenoid: Service and Repair

1. Remove instrument panel lower cover and knee bolster.
2. Remove steering column upper and lower covers.
3. Disconnect 2-P electrical connector from shift lock solenoid.
4. Remove shift lock extension.

Fig. 16 Shift Lock Solenoid Replacement:

5. Remove screw and detent spring washer, Fig. 16.
6. Remove shift lock solenoid.
7. Reverse procedure to install, noting the following:
a. Ensure shift lock stop does not protrude when solenoid is On.
b. Ensure shift lock solenoid does protrude more than 0.30 inches when shift lock is Off.